Mobile Phones

AIRLIVE P-201U DRIVER

By admin on February 29, 2020 0 Comments

Select the Printer Model that is attached to the Print Server. Server Name, the name of the print server. The print server can support IPP printing by default. Configure Remote LPD Printing on the Host The procedure you use to configure your Unix host s to allow printing to your network remote print server varies between different varieties of Unix. Enter a priority number for the queue service, or press Enter to accept the default. Setup the NetWare printing.

Uploader: Tukasa
Date Added: 23 September 2004
File Size: 69.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 97609
Price: Free* [*Free Regsitration Required]

Select to enable required printing protocol. The information of the printer is displayed in the windows. Connect the print server to your network by attached the network cable to the UTP port of the print server.

You have added the network printer to the PC successfully. The number is IPP standard port number.

Server Name, the name of the print server. Setup the AppleTalk printing.

The Print Server windows utilities Installation procedure is totally completed. You must use Remote Ports Utility described in the next section to manage remote across network segments print servers. Comments to this Manuals Your Name.

  82810 MOTHERBOARD DRIVER

LPR Printing can be set up on any Macintosh with version 9. If it is enabled, please set up the following parameters. More than one printer name can be used, with variants separated by vertical bars name1 name2.

It is recommended to print a test page.

AirLive PU User Manual | Page 97 / | Also for: P

This print server supports NetWare Bindery Printing method. The system will start to install the utilities automatically. Press Insert and add your newly created print queue to the list of queues serviced by the printer. Unpack the print server package pp-201u verify that all the items listed in the section 1. NetWare Network Chapter 6. Each print server should log into a NetWare server before servicing the print jobs.

After you successfully enter the correct username and password, the following prompt will be displayed and you can start to manage this print server by command.

Airlive PU Manuals

This page lists the information of printers connected to all printer ports. Press Enter to select the newly created print server.

  ATI RADEON IGP 345M DRIVER

Page Printer Address: Change the current file server, if necessary, using the Change Current File Server menu selection.

The default values are as follows. Print Server Name, the name of the print server. The print server periodically polls the NetWare server printer queues for printing jobs.

AIRLIVE P-201 User Manual

Page of Go. After entering the IP address of the print server, a login page display. It is needless to airlife any setting. You can enter the installed location of the print server here. You also have to make sure that any gateway; All of your previous setup will be cleared. Also See for P Quick setup sirlive – 56 pages. This utility is automatically installed during Windows Administrator Utility installation procedure – refer to section 3.